IEC's Leveling Feet Selection Guide by Feature

Arranged by Light, Medium, and Heavy Duty Classifications

INTERNATIONAL EQUIPMENT COMPONENTS

2201 E. Willow St, Suite D, PMB-104, Signal Hill, CA 90755
Phone: 562-597-4533, Fax: 562-498-2275, LevelingMounts.com, glides@verizon.net

Our Motto: Any thread of any length on any base! ®

To print pages in our site, click anywhere in lower frame (below menu bar) before printing.


Light Duty Glides

Typical applications: Tables, Chairs, Instruments, Furniture, Cabinets, etc.

Key features: Swivel or Rigid base. Low cost.

Medium-Duty Low-Profile Delrin/Polypropylene/Polyethylene Levelers

Typical applications: Enclosures, Telecom and Computer Cabinets, Gaming and Vending Machines, Display and Equipment Racks, Biomedical and Fitness Equipment, etc.

Key features: Low profile rigid base. Any thread size can fit on any base diameter. Optional top-end and bottom-end (speeds installation) hex, slot, or broach (internal hex). Optional nylon thread locking patch (to eliminate unthreading during shipping).

Heavy-Duty Low-Profile Steel Levelers

Typical applications: Enclosures, Telecom and Computer Cabinets, Surface Mount Transfer (SMT), Equipment Racks, Medical Equipment, etc.

Key features: Low profile swivel or rigid base. Any thread size can fit on any base diameter. Optional top-end hex, slot, or broach (internal hex).

Heavy-Duty Slant-Based Steel Levelers

Typical applications: Semiconductor Processing Equipment, Machinery, Enclosures, Telecom and Computer Cabinets, Surface Mount Transfer (SMT), Equipment Racks, Medical Equipment, Ovens, etc.

Key feature: Heavy duty swivel design.

e-Catalog (.pdf), page 1 : Heavy Duty Swivel Levelers - Click Here

e-Catalog (.pdf), page 2 : Medium Duty Levelers - Click Here

e-Catalog (html) : Light Duty Glides - Click Here


DETAILED DESCRIPTIONS BY GROUP


Light Duty Glides

Typical load capacity: Under 100 lbs per foot.

Typical applications: Tables, Chairs, Instruments, Furniture, Cabinets, etc.

Key feature: Low cost.


Options Available:

Rigid Nylon Glides

IL9 thru IL12, IL13, IL16, IL17, IL18, IL31 thru IL37, IL39, IL40, IL41

1/28/00 - 5/16-18 glides are now stocked. Shown above: IL9-51.5H & IL9-51 (5/16-18 x 1-1/2" with hex, 1-3/8" base & 5/16-18 x 1" w/o hex). Also available, P/N: IL11-61H (3/8-16 x 2-1/2" with hex, 1-3/4" base) & IL12-72H (1/2-13 x 2-1/2" with hex, 1-3/4" base).


10/18/02 - Non-swivel clear glide: Shown above is P/N: IL13-41C. It has a 1/4-20 x 7/8" thread on a 1-1/8" dia. clear plastic base. Also availble in 1/2" thread length (IL13-4CX1/2).

1/3/00 - Steel glides with a plastic cushion are available. Shown above is IL16-41 (1/4-20 x 1", 7/8" base), P/N: IL17-51 (5/16-18 x 1", 1-1/8" base), and P/N: IL18-51 (5/16-18 x 1", 1-1/4" base). To order 3/8-16 x 1" thread size, use P/N: IL18-61


8/20/04 - Black Glides: Shown above is our 3/8-16 black zinc-plated glide with a 1-5/8" dia black plastic base. It is available in 1-1/2" thread length (p/n: IL31-6BX15), a 2-1/2" thread length (p/n: IL31-6BX25), and a 3-1/2" thread length (p/n: IL31-6BX35).


6/12/01 - 1/2-13, 3/8-16, 5/16-18 and 1/4-20 levelers are now in stock. Shown above is IL32-6BX15 (3/8-16 x 1-1/2" leveler, 1-1/4" dia. black nylon base with 7/8" hex and bottom phillips slot). The part numbers for the 1/4-20, 5/16-18 & 1/2-13 version are IL32-4BX15, IL32-5BX15 & IL32-7BX15, respectively. 1" dia. and 1" thread length also available.


4/23/01 - 3/8-16 x 1" and 1-1/2" levelers are now in stock. Shown above are (L to R) IL33B-61B (3/8-16 x 1" leveler, 2" dia. poly base, bottom slot) and IL33-6BX15-SL (3/8-16 x 1-1/2" slotted leveler, 1-1/2" dia. poly base). Also available IL33A-6BX15-SL (3/8-16 x 1-1/2" slotted leveler, 1-3/4" dia. black poly base).

.

4/24/01 - 1/4-20 x 1" swivel glides and 5/16-18 x 1-1/2" (and 4") rigid glides are now in stock. Shown in left photo above are (L to R) IL38-41B (1/4-20 x 1" swivel leveler, 1-1/4" dia. base,) and IL39-5BX15-SL (5/16-18 x 1-1/2" slotted leveler, 1" black hex base). Shown in right photo above are (L to R) IL36-41 (1/4-20 x 1" leveler, 1-1/8" dia. beige curved base,) and IL36-54-SL (5/16-18 x 4" slotted leveler, 1-1/8" dia. beige flat base).


1/29/00 - Low Profile 1/4-20 octagon based glides are available. Shown above is the IL39-4BX15 (1/4-20 x 1-1/2", 1" base).


9/28/02 - Hex Based Levelers: Shown above-left is P/N: IL40-5X15-SL. It has a 5/16-18 x 1-1/2" thread with top-end slot on a 3/4" hex base. Also available in 1/2", 1" & 1-1/4" lengths and in 1/4-20, 3/8-16, 1/2-13 & metric thread sizes. Also available with a gray polyethylene pad that is factory-installed over the hex (add -GC to P/N). The right-hand hex leveler is P/N: IL41-5X25. It has a 5/16-18 x 2-1/2" thread on a 1-3/8" hex base. Also available in 1-1/2" lengths and in 1/4-20, 3/8-16 & 1/2-13 x 3" thread sizes.

Nylon Swivel Glides:

IL13, IL38, IL52

.

1/5/00 - 1/4-20, 5/16-18 and 3/8-16 swivel glides are available. Shown above-left is IL13-41 (1/4-20 x 1", 1-1/8" base, nickel-plated shell) and P/N: IL13-51X15 (5/16-18 x 1-1/2", 1-1/8" base).
4/24/01 - 1/4-20 x 1" swivel glides and 5/16-18 x 1-1/2" (and 4") glides are now in stock. Shown in right photo above are (L to R) IL38-41B (1/4-20 x 1" swivel leveler, 1-1/4" dia. base,) and IL39-5BX15-SL (5/16-18 x 1-1/2" slotted leveler, 1" black hex base).


4/20/01 - 3/8-16 x 1-1/2", 2-1/2", 3", 3-1/2" and 4" slotted swivel levelers are now in stock. Shown above are (L to R) IL52-64-SL (3/8-16 x 4" slotted swivel leveler, 1-1/2" dia. base) and IL52-63-SL (3/8-16 x 3" slotted swivel leveler, 1-1/2" dia. base). 1-1/2" length = P/N: IL52-6X15-SL, 2-1/2" length = P/N: IL52-6X25-SL.

Steel & Plastic Nail Glides:

IL19, IL20, IL21


Rubber/Vinyl Vibration and Anti-skid Glides:

IL9R, IL15, IL80 thru IL88


12/31/02 - Vibration Levelers: Shown above is P/N: IL10V-72HB. It has a 1/2-13 x 2" free-turning thread on a 1-1/2" dia. black neoprene base. Also available with non-marring gray rubber base, P/N: IL10V-72HG. Alternate thread sizes include 3/8-16 x 3" (IL10V-63HB) or 5/16-18 x 1-1/2" (1" nylon or rubber base) (IL10V-51HB).


1/4/00 - Black vinyl glides are available. Shown above is IL15-41 (1/4-20 x 1", 1-1/8" base), P/N: IL15-6X1 (3/8-16 x 1", 1-1/8" base), and P/N: IL15-6X15 (3/8-16 x 1-1/2", 1-1/8" base). To order 1/4-20 x 1/2", use P/N: IL15-4X1/2. To order 5/16-18 x 1-1/2" thread size, use P/N: IL15-5X15. To order 3/8-16 x 1" use P/N: IL15-6X1.


4/6/02 - Just released: 1/4-20, 5/16-18 and 3/8-16 black or white vinyl based levelers with 1-1/2", 2", 2-1/2", and 3" diameter solid PVC bases for non-skid/vibration applications. Shown above is P/N: IL82-5WX125-PVC. It has a 5/16-18 x 1-3/8" stud with a 1-1/2" dia. white poly-vinyl base. The P/N for the 2", 2-1/2" and 3" dia. versions are IL84-5WX125-PVC and IL86-5WX125-PVC and IL88-5WX125-PVC. To order in black, use a B instead of W in the part number. To order stainless, use a S after B or W. Also available in gray, red and other colors and other materials per your specifications.

Steel Based Glides:

IL16 thru IL18, IL22, IL23

.

1/3/00 - Steel glides with a plastic cushion are available. Shown above is IL16-41 (1/4-20 x 1", 7/8" base), P/N: IL17-51 (5/16-18 x 1", 1-1/8" base), and P/N: IL18-51 (5/16-18 x 1", 1-1/4" base). To order 3/8-16 x 1" thread size, use P/N: IL18-61
2/22/00 - We have expanded our Swivel-type chair and furniture glide offerings. Shown above are P/N's: IL22S-R3 (7/8" tubing), IL23S-S2 (1" square tubing) & IL22X-R625 (5/8" tubing) with n

Standard Thread Sizes:

-4 = -20, -5 = 5/16-18, -6 = 3/8-16, -7 = -13

Standard Thread Lengths:

, 1, 1-1/2, 2, 2-1/2, 4

Standard Base Diameters:

1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-3/4, 2

Accessories:

Threaded Inserts for tubing: IL24 thru IL27


1/1/00 - Threaded inserts are available. Shown in top row above (L-R) is P/N: IL25-4 (1/4-20 threaded insert for 1" square tubing, 16-18 ga.), P/N: IL25-4-ST (1/4-20 threaded insert with star clip for 1" square tubing, 16-18 ga.), P/N: IL27-R5-ST (5/16-18 threaded insert with star clip for 1-1/2" round tubing, 16-18 ga.), and P/N: IL27A-6-ST (3/8-16 threaded insert with star clip for 2" square tubing, 16-18 ga.). To order for 1-1/4" tubing, use P/N: IL26-??-ST. Shown in bottom row above (L-R) is P/N: IL29-7T (1/2-13 steel tee-nut for wood), IL29-6T (3/8-16 t-nut), IL29-5T, (5/16-18 t-nut), IL29-5P (5/16-18 propellor nut) and IL29-4 (1/4-20 propellor nut). Weld nuts also available.

Weld Nuts for steel: IL28

Tee Nuts for wood: IL29

Threaded Corner Brackets, Side Brackets: IL53


4/20/01 - Side and Corner Brackets are now available. Shown above are (L to R) IL51-64-SB (side braket with 3/8-16 x 4" slotted swivel leveler, 1-1/2" dia. base) and IL50-63-CB (corner bracket/brace with 3/8-16 x 3" slotted swivel leveler, 1-1/2" dia. base). To order just the brackets use P/N's: IL53-SB (side bracket) or IL53-CB (corner bracket). Many more thread lengths and leveler options are available for these brackets.


11/5/02 - New Accessories: 3/8-16 corner brackets and side brackets, 5/16-18 corner bracket, 1/4-20 thru 1/2-13 t-nuts, and various types of tubing inserts (4-sided or star-clip style).


2/27/03 - Caps for tubing: Shown above are caps for square and round tubing. The fin style caps fit a range of 12-23 gauge tubing. The Part number for the 2" square cap is IL27B-CAP-BK, 1-1/2" square is IL27-CAP-BK, 1" square is IL25-CAP-BK and 3/4" square is IL24A-CAP-BK.
NEW GLIDES:


1/19/04 - Vinyl, non-skid glides: Shown above-left is P/N: IL9-5HX15-PVC. It has a 5/16-18 x 1-1/2" thread on a 1-3/8" dia. gray vinyl base. The right-hand leveler is P/N: IL12-72H-PVC. It has a 1/2-13 x 2" thread on a 1-11/16" gray vinyl base.


1/16/04 - Black base glides: Shown above is P/N: IL9-62HB. It has a 3/8-16 x 2" thread on a 1-3/8" dia. black poly base.


1/15/04 - Metal based swivel glide: Shown above is P/N: IL54-63. It has a 3/8-16 x 3" thread with lower hex on a 1-3/4" dia. metal swivel base. Also available in shorter thread lengths (2-1/2", 2", 1-1/2")


1/14/04 - Side/End mount furniture glide: Shown above is P/N: IL55B. It has a 1" adjustable height black 1-1/8" dia. plastic base. Adjustment is done using an allen wrench. The metal flange is 2" wide, 1-1/4" tall, 3/8" thickness to prongs. Distance to hole centers is 1-1/2".


12/10/03 - Round bottom nail glides


12/9/03 - Flat bottom, swivel, rectangular & felt nail glides


12/8/03 - Hex type threaded glides


12/7/03 - Octagon, hex & low profile black base threaded glides


12/6/03 - Swivel glides


12/5/03 - Vinyl & rubber glides


12/4/03 - Clear, white & beige glides. Small casters.


12/3/03 - Rubber crutch tip feet & caps/plugs


12/2/03 - Threaded inserts for tubing, wood & metal (weld type)


12/1/03 - Side & Corner brackets

e-Catalog (html) : Light Duty Glides - Click Here


Medium-Duty Low-Profile Polypropylene/Delrin/Polyethylene Levelers

Typical load capacity: 100 - 1000 lbs per foot. Typical applications: Enclosures, Telecom and Computer Cabinets, Gaming and Vending Machines, Display and Equipment Racks, Biomedical and Fitness Equipment, etc.

Key features: Low profile rigid base. Any thread size can fit on any base diameter. Optional top-end and bottom-end (speeds installation) hex, slot, or broach (internal hex). Optional nylon thread locking patch (to eliminate unthreading during shipping).

.

.
Standard Base Materials:

Polypropylene, Polyethylene, Delrin: IL7, IL7A, IL7M, IL8, IL8A, IL80 thru IL88

Vinyl: -NSP (non-skid pad) only available in 3 dia.

Standard Thread Sizes:

-4 = -20, -5 = 5/16-18, -6 = 3/8-16, -7 = -13, -8 = 5/8-11, -9 = -10

Standard Thread Lengths:

1-1/2, 2, 2-1/2, 3, 3-1/2, 4, 5

Standard Base Diameters:

1, 1-1/2, 2, 2-1/2, 3


.

10/1/01 - Now available: 1/4-20, 5/16-18 & 3/8-16 medium duty leveler with 3" diameter base. Shown above-left is P/N: IL88-5BX125. It has a 5/16-18 x 1-1/4" clear zinc plated stud with a 3" dia. black polyethylene base, grip ridges on outside diameter. The right photo shows all four base diameter options: 1-1/2", 2", 2-1/2" and 3". P/N's: IL82-5BX125, IL84-5BX125, IL86-5BX125 and IL88-5BX125.


12/20/02 - Top Hex Levelers: Shown above-left is P/N: IL8A-7BX3-HX. It has a 1/2-13 x 3" thread with top-end hex (lower hex also) on a 3" dia. black poly base. Also available with other base diameters. The right-hand leveler is P/N: IL7M-6BX3-HX. It has a 3/8-16 x 3" thread on a 2-1/2" base.

e-Catalog (.pdf), page 2 : Medium Duty Levelers - Click Here


Heavy-Duty Low-Profile Steel Levelers

Typical load capacity: 1000 10,000 lbs per foot. Typical applications: Enclosures, Telecom and Computer Cabinets, Surface Mount Transfer (SMT), Equipment Racks, Medical Equipment, etc.

Key features: Low profile base. Any thread size can fit on any base diameter. Optional top-end and bottom-end hex, slot, or broach (internal hex).

Standard Base Materials:

Steel and Stainless: IL62 thru IL70

Elastomer Pad: -P

Standard Thread Sizes:

-4 = -20, -6 = 3/8-16, -7 = -13, -8 = 5/8-11,
-9 = -10, -10 = 1-8, -12 = 1-1/4-7

Standard Thread Lengths:

1-1/2, 2, 2-1/2, 3, 3-1/2, 4, 5, 6

Standard Base Diameters:

1-1/4, 1-7/8, 2-1/2, 3, 3-1/2", 4



9/10/02 - New Product Family: Non-Tilt Low Profile Levelers. Shown above is P/N: IL64-7G-NT. It has a 1/2-13 x 2" stud with a 1-7/8" dia. steel base. The stud is free-rotating yet only tilts 1-2 degrees. The non-tilt design helps prevent base and stud separation. Use the same part numbers as the low-profile family of levelers, but add -NT to the part number.


2/14/04 - Fixed Stud and Socket Levelers: Shown above are zinc plated non-swivel levelers designed for extra sturdiness and to eliminate pad separation from the stud. Four lag holes are included in order to bolt the 4" base diameter to the floor. We offer three socket types: 3/4-10 (IL91-9), 5/8-11 (IL91-8) and 1/2-13 (IL91-7). We also offer three stud types: 3/4-10 x 4" (IL92-9X4), 5/8-11 x 4" (IL92-8X4) and 1/2-13 x 4" (IL92-7X4). Also available with other base diameters, thread sizes and finishes. You can also order with an elastomer pad or without the lag holes.

e-Catalog (.pdf), page 1 : Heavy Duty Swivel Levelers - Click Here


Heavy-Duty Slant-Based Steel Levelers

Typical load capacity: 1000 20,000 lbs per foot. Typical applications: Semiconductor Processing Equipment, Machinery, Enclosures, Telecom and Computer Cabinets, Surface Mount Transfer (SMT), Equipment Racks, Medical Equipment, Ovens, etc.

Key feature: Heavy duty slant base design.

.

Standard Base Materials:

Steel: IL1, IL2

Delrin: IL3, IL4

Stainless: IL5, IL6

Elastomer: -P

Standard Thread Sizes:

-4 = -20, -6 = 3/8-16, -7 = -13, -8 = 5/8-11, -9 = -10, -10 = 1-8

Standard Thread Lengths:

2, 4

Standard Base Diameters: 1-1/4, 1-7/8, 2-1/2, 3, 4


e-Catalog (.pdf), page 1 : Heavy Duty Swivel Levelers - Click Here


To view our New Leveler Photos sorted by Date - Click Here

To view our Leveler Photos sorted by Group Classification - Click Here

To print pages in our site, click anywhere in lower frame (below menu bar) before printing.


Last Revision: 8/21/04

INTERNATIONAL EQUIPMENT COMPONENTS

2201 E. Willow St, Suite D, PMB-104, Signal Hill, CA 90755
Phone: 562-597-4533, Fax: 562-498-2275, LevelingMounts.com, glides@verizon.net

Thanks for visiting IEC. Have a nice day.

Copyright © 1996-2004